Package: dfu-util
Version: 0.8-1
Architecture: amd64
Maintainer: Uwe Hermann <uwe@debian.org>
Installed-Size: 125
Depends: libc6 (>= 2.14), libusb-1.0-0 (>= 2:1.0.8)
Homepage: http://dfu-util.gnumonks.org/
Priority: extra
Section: electronics
Filename: pool/main/d/dfu-util/dfu-util_0.8-1_amd64.deb
Size: 29808
SHA256: c9781c0b7d3fdbaf82160fc51d2c9db46e0a82ee292ab1d3ce5619e442b1eb2d
SHA1: 51d548a247e30979c1c5b6e19937c2f1565b63a9
MD5sum: 313c1371cb2625989abab144456d2582
Description: Device firmware update (DFU 1.0) USB programmer
 dfu-util is a program that implements the host (PC) side of the USB DFU 1.0
 (Universal Serial Bus Device Firmware Upgrade) protocol.
 .
 Note: At this point only DFU version 1.0 is supported!
 .
 In the OpenMoko project (for example), this program is used to communicate
 with the specially enhanced bootloader u-boot, which implements the DFU
 device side.